Design center
Learning center
Position sensing in vehicles: how new magnetic encoder technology helps ensure accurate, fault-free sensor outputs
July 29, 2010
Angle and motion sensors are widely used in vehicles for applications such as pedal position-sensing, throttle control, and in transmissions and steering wheels. It hardly needs stating that, particularly in steering systems and the throttle, reliable operation is absolutely essential to the safety of ...
- Secure middleware for IP-based in-vehicle communication
- AUTOSAR: New paths to ECU software - part 2
- AUTOSAR: New Paths to ECU Software
- EMI Challenge to Ethernet in the Car
- Intelligent brake light: A proposal
- Measurement of exhaust gas temperature and control of exhaust gas after-treatment systems
- Delta-Sigma converters for audio output in an infotainment FPGA
- Bosch full hybrid concept in detail
- AUTOSAR: from concept to code
- ATOP – a highly integrated approach for the automotive telematics mass market
EMI Challenge to Ethernet in the Car
Wed, 30 Jun 2010 11:27:00 GMT
Ethernet can now be added to the list of automotive networks, such as CAN, LIN, FlexRay and MOST. But why is it needed and for what applications? The reason is simple and is why Ethernet totally dominates office networking and is now the choice for both factory and the home. Simplicity and field-proven open standardisation have significantly lowered the Cost of Ownership in every application Ethernet has entered. Volumes of scale in the office and consumer market supported by a magnitude of Ethernet vendors have driven pricing levels far lower than any ‘custom' designed protocol.
Ethernet can now be added to the list of automotive networks, such as CAN, LIN, FlexRay and MOST. But why is it needed and for what applications? The reason is simple and is why Ethernet totally dominates office networking and is now the choice for both factory and the home. Simplicity and field-proven open standardisation have significantly lowered the Cost of Ownership in every application Ethernet has entered. Volumes of scale in the office and consumer market supported by a magnitude of Ethernet vendors have driven pricing levels far lower than any ‘custom' designed protocol.
- AUTOSAR: from concept to code
- Fujitsu and Visteon Work with Land Rover to Implement New State-of-the-Art “Virtual Image Cluster” for the 2010 Range Rover
- Driving Flexibility into Automotive Electronics Design
- Controlling Automotive Electronic Emissions and Susceptibility with Proper EMI Suppression Methods
- μPower Buck Regulator Safely Rides Through Automotive Load Dumps
- Challenges in Automotive Radio Design
- Software Defined Radio - the next-generation automotive radio platform
- Getting FlexRay Under Control (Part 2) - Automated Analysis and Validation
- Getting FlexRay Under Control (Part 1)
Today's news
- Earth has enough copper for e-mobility, researchers say
- Price pressure in autmotive supply chain will continue, study says
- MeeGo in-vehicle win gives embedded Intel a boost
- Home media server embraces car infotainment
- PSA secures loan to finance plug-in hybrid development
- SerDes to play key role in infotainment electronics, NatSemi says
- Continental box locates vehicles - worldwide
- Volkswagen bundles global e-mobility R&D efforts
- DIANA research project aims at automotive electronics diagnostic capabilities
- Graphene batteries said to recharge in 10 minutes
New Products
- HiL add-on board supports e-motor simulation
- QNX Neutrino 6.5 offers enhanced multiprocessor support
- Infineon boosts TriCore MCU architecture computing power
- CMOS AM/FM LNA integrates adjustable gain control for active car antenna applications
- Infineon Power MOSFET features very low on-resistance
- Wireless control receiver combines high sensitivity, low power
- Rugged power meters target EMC immunity testing
- dSpace offers Diesel exhaust system simulation
- Silicone paste offers electric and thermal conductivity
- QNX RTOS safe kernel receives SIL 3 certification
Next events
April 05, 2011 to
April 06, 2011
Exhibitions
Printed Electronics Europe - Dusseldorf
November 30, 2010 to
December 01, 2010
Exhibitions
IP - SoC 2010 - Grenoble
November 30, 2010 to
December 03, 2010
Workshops
PowerMEMS 2010 - Leuven
November 23, 2010 to
November 25, 2010
Exhibitions
SPS-Drives - Nuremberg
November 09, 2010 to
November 12, 2010
Exhibitions
electronica - Munich
MOST POPULAR NEWS
- Bosch airs all-electric vehicle strategy
- Munich University e-car concept brings down TCO
- Retrofit kit will turn diesel van into e-car
- Bosch Car Multimedia takes Linux inside
- Nissan blames IC vendor for abrupt production halt
- BMW integrates iPod and iPhone into its vehicles
- SerDes to play key role in infotainment electronics, NatSemi says
- Brose tops automotive electronics growth ranking
- BMW e-car will feature lightweight construction
- Continental box locates vehicles - worldwide
Interview
Technical papers
- EMI Challenge to Ethernet in the Car
- AUTOSAR: from concept to code
- Fujitsu and Visteon Work with Land Rover to Implement New State-of-the-Art “Virtual Image Cluster” for the 2010 Range Rover
- Driving Flexibility into Automotive Electronics Design
- Controlling Automotive Electronic Emissions and Susceptibility with Proper EMI Suppression Methods
- μPower Buck Regulator Safely Rides Through Automotive Load Dumps
- Challenges in Automotive Radio Design
- Software Defined Radio - the next-generation automotive radio platform
- Getting FlexRay Under Control (Part 2) - Automated Analysis and Validation
- Getting FlexRay Under Control (Part 1)
Poll
All material on this site Copyright © 2009 - 2010 European Business Press SA. All rights reserved.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
